MAX1197ECM+TD【PDF 19/22 页】IC ADC 8BIT 60MSPS DL 48-TQFP

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录2008

15页 16页 17页 18页 [19页]20页 21页 22页

MAX1197

Dual, 8-Bit, 60Msps, 3V, Low-Power ADC with

Internal Reference and Parallel Outputs

_______________________________________________________________________________________

ELECTRICAL CHARACTERISTICS (continued)

(VDD = OVDD = 3V, 0.1F and 2.2F capacitors from REFP, REFN, and COM to GND; REFOUT connected to REFIN through a 10k

resistor, VIN = 2VP-P (differential with respect to COM), CL = 10pF at digital outputs, fCLK = 60MHz, TA = TMIN to TMAX, unless otherwise

noted.

≥ +25°C guaranteed by production test, < +25°C guaranteed by design and characterization. Typical values are at TA = +25°C.)

Note 1: Guaranteed by design. Not subject to production testing.

Note 2: Intermodulation distortion is the total power of the intermodulation products relative to the total input power.

Note 3: Analog attenuation is defined as the amount of attenuation of the fundamental bin from a converted FFT between two

applied input signals with the same magnitude (peak-to-peak) at fIN1 and fIN2.

Note 4: REFIN and REFOUT should be bypassed to GND with a 0.1F (min) and 2.2F (typ) capacitor.

Note 5: REFP, REFN, and COM should be bypassed to GND with a 0.1F (min) and 2.2F (typ) capacitor.

Note 6: Typical analog output current at fINA&B = 20MHz. For digital output currents vs. analog input frequency,

see Typical Operating Characteristics.

Note 7: See Figure 3 for detailed system timing diagrams. Clock to data valid timing is measured from 50% of the clock

level to 50% of the data output level.

Note 8: Crosstalk rejection is tested by applying a test tone to one channel and holding the other channel at DC level.

Crosstalk is measured by calculating the power ratio of the fundamental of each channel’s FFT.

Note 9: Amplitude matching is measured by applying the same signal to each channel and comparing the magnitude of the funda-

mental of the calculated FFT.

Note 10: Phase matching is measured by applying the same signal to each channel and comparing the phase of the fundamental

of the calculated FFT. The data from both ADC channels must be captured simultaneously during this test.

Note 11: SINAD settles to within 0.5dB of its typical value in unbuffered external reference mode.

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

Wake up from sleep mode

Wake-Up Time

tWAKE

Wake up from shutdown mode (Note 11)

CHANNEL-TO-CHANNEL MATCHING

Crosstalk

fINA or B = 20MHz at -1dB FS (Note 8)

-72

Gain Matching

fINA or B = 20MHz at -1dB FS (Note 9)

0.05

Phase Matching

fINA or B = 20MHz at -1dB FS (Note 10)

±0.05

Degrees

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式